| 1,632 | 8 | 55 |
| 下载次数 | 被引频次 | 阅读次数 |
针对磁阻式电磁发射器的技术特点,设计了一种基于传感器控制的多级电磁炮射击装置,并成功试制了电磁发射装置样品,通过单级加电压和改变炮弹初始位置的方法对样品进行试射,并在此基础上加装三级加速,从而得出三级电磁炮的发射最优配置,试验证明,在280V电压下,炮弹的出口速度达到27.52m/s.
Abstract：According to technical characteristics of the magnetic resistive electromagnetic launcher,we have designed a kind of multi-stage electromagnetic shooting device based on sensor control,and successfully manufactured a sample of the electromagnetic launcher.The sample has been tested through the single-stage applied voltage and the change of initial position of projectile.Three-stage acceleration has been installed based on single-stage test,and optimal settings of three-stage electromagnetic gun are concluded.The test shows that the outlet velocity of projectile can reach 27.52m/s under the voltage of 280V.
[1]张龙霞,李碧清,霍敏.国外电磁炮发展概述[J].飞航导弹,2011,(11):23～27
[2]王莹,肖峰.电炮原理[M].北京:国防工业出版社,1995.174
[3]赵凯华,陈熙谋.电磁学[M].北京:高等教育出版社,2006.117～118
[4]朱英伟,严仲明,谢晓芳等.磁阻型线圈发射减速力研究[J].电工电能新技术,2010,29(2):62～66
[5]贵培炎.多级电磁枪基本原理与实验模拟[J].工业技术,2011,(38):15
[6]贾伯年,俞朴,宋爱国.传感器技术[M].南京:东南大学出版社,2007,117～200
[7]王松德,王晨炳.红外光电开关的制作[J].电工技术,2004,(3):60
基本信息:
中图分类号:TJ399
引用信息:
[1]费付聪,李渊成,唐勇,等.基于传感器控制的多级磁阻式电磁炮制作与研究[J].物理与工程,2013,23(01):25-28+35.
2013-02-15
2013-02-15